Upload a List of Subnets with Only Static IP Addresses
Table of Contents
Expand all | Collapse all
-
- Firewall and PAN-OS Support of IoT Security
- IoT Security Prerequisites
- Onboard IoT Security
- Onboard IoT Security on VM-Series with Software NGFW Credits
-
- DHCP Data Collection by Traffic Type
- Firewall Deployment Options for IoT Security
- Configure a Pre-PAN-OS 10.0 Firewall with a DHCP Server
- Configure a Pre-PAN-OS 10.0 Firewall for a Local DHCP Server
- Use a Tap Interface for DHCP Visibility
- Use a Virtual Wire Interface for DHCP Visibility
- Use SNMP Network Discovery to Learn about Devices from Switches
- Use Network Discovery Polling to Discover Devices
- Use ERSPAN to Send Mirrored Traffic through GRE Tunnels
- Use DHCP Server Logs to Increase Device Visibility
- Plan for Scaling when Your Firewall Serves DHCP
- Prepare Your Firewall for IoT Security
- Configure Policies for Log Forwarding
- Control Allowed Traffic for Onboarding Devices
- Support Isolated Network Segments
- IoT Security Integration with Prisma Access
- IoT Security Licenses
- Offboard IoT Security Subscriptions
-
- Introduction to IoT Security
- IoT Security Integration with Next-generation Firewalls
- IoT Security Portal
- Vertical-themed Portals
- Device-to-Site Mapping
- Sites and Site Groups
- Networks
- Reports
- IoT Security Integration Status with Firewalls
- IoT Security Integration Status with Prisma Access
- Data Quality Diagnostics
- Authorize On-demand PCAP
- IoT Security Integrations with Third-party Products
- IoT Security and FedRAMP
Upload a List of Subnets with Only Static IP Addresses
Assist
IoT Security
in discovering static IP devices
by uploading a CSV file containing a list of subnets with static
IP addresses.In the case where an entire subnet consists
of static IP addresses, it’s more efficient to add a subnet and
define it as having static IP addresses than adding numerous static
IP devices individually. When you have multiple subnets with static
IP addresses, you can upload all of them in a CSV file at once.
There
is a limit of 10,000 subnets for each uploaded CSV file. If you
need to upload more than 10,000, upload multiple CSV files.
After
you provide
IoT Security
with a subnet configuration specifying
that it has static IP addresses and then IoT Security
detects traffic
from a device in that subnet, it considers the device a static IP
device. Using the IP address as the device ID (instead of a MAC
address), it adds the device to its inventory. IoT Security
adds
static IP devices to its inventory in this manner only for devices
that are not discovered through other detection mechanisms such
as ARP logs.If you later remove a static IP subnet
after
IoT Security
added static IP devices for this subnet to its
inventory, IoT Security
reverses this action and automatically removes
them from its inventory.- Navigate to the Networks page () and then clickNetworksNetworks and SitesNetworks.AddUpload Subnets
- Click the link to download the CSV template.
- Fill out the template with subnet information.Enter the following for each subnet you want to upload:prefix: Enter the IP address of the subnet in dot-decimal notation and its netmask in CIDR notation (example, 10.1.1.0/24). This appears on the Subnets page, and for a device in this subnet, the subnet and netmask appear on the Devices and Device Details pages.vlan: (Optional) Enter a VLAN ID. If entered, this also appears on the Subnets page, and for a device in this subnet, it appears on the Devices and Device Details pages.description: (Optional) Enter a description of the subnet/VLAN, perhaps noting the type of devices for which it’s intended. These special characters are not allowed in the description field: ~ ` ! # $ % ^ & * + = { } [ ] | \ < > ? This description only appears on the Subnets page.static: Enteryesto define this as a subnet containing static IP addresses. WhenIoT Securitydiscovers a device from a user-configured static IP subnet in a different L2 domain from the firewall and adds it to its inventory, the Source column on the Devices page showsUser-Configured. (Leave it blank if you do not want the subnet to be static).monitored: Enteryesif you wantIoT Securityto provide device profiling, behavioral analysis, and risk monitoring of the devices in this subnet. Leave it blank if you only wantIoT Securityto detect the devices in the subnet and perform a simplified device identity analysis. Based on this field, theIoT Securityportal displaysYesorNoin theMonitoredcolumn in the Networks table ontab and provides the appropriate level of device monitoring, analysis, and protection.NetworksNetworks and SitesNetworksTheAdd a subnetoption does not provide an option to specify a subnet as monitored or unmonitored.IoT Securityautomatically classifies an added subnet as monitored. However, you can change its classification after you add it by selecting the subnet and clickingStop Monitoringabove the Networks table. You can also make multiple selections to stop monitoring multiple subnets at the same time. Later you can select unmonitored subnets and clickStart Monitoringabove the table.
- Upload the CSV file.On the Networks page, click, choose or drag the completed CSV file onto the space in the dialog box, and then clickAddUpload SubnetsUpload.IfIoT Securitypreviously detected network activity from an IP address in one of the uploaded subnets, it now considers it a static IP address and automatically adds a static IP device to the inventory on the Devices page. Similarly, ifIoT Securitylater detects traffic from an IP address in one of these subnets, it automatically adds an entry to the inventory at that time.It can take several minutes for new entries to appear on the Devices page.