The Palo Alto Networks next-generation firewall supports
a variety of policy types that work together to safely enable applications
on your network.
For all policy types, when you Enforce Policy Rule Description, Tag, and Audit Comment, you can use
the audit comment archive to view how a policy rule changed over
time. The archive, which includes the audit comment history and
the configuration logs, enables you to compare configuration versions
and review who created or modified and why.
Make sure you understand that in policy rules, the set of IPv4
addresses is treated as a subset of the set of IPv6 addresses, as
described in detail in Policy.
Policy Type
Description
Security
Determine whether to block or allow a session
based on traffic attributes such as the source and destination security
zone, the source and destination IP address, the application, user,
and the service. For more details, see Security
Policy.
NAT
Instruct the firewall which packets need
translation and how to do the translation. The firewall supports
both source address and/or port translation and destination address
and/or port translation. For details, see NAT.
QoS
Identify traffic requiring QoS treatment
(either preferential treatment or bandwidth-limiting) using a defined
parameter or multiple parameters and assign it a class. For more
details, see Quality
of Service.
Policy Based Forwarding
Identify traffic that should use a different
egress interface than the one that would normally be used based
on the routing table. For more details, see Policy-Based
Forwarding.
Decryption
Identify encrypted traffic that you want
to inspect for visibility, control, and granular security. For more
details, see Decryption.
Application Override
Identify sessions that you want to bypass
App-ID layer 7 processing and threat inspection. Traffic that matches
an application override policy forces the firewall to handle the
session as a stateful inspection firewall at layer 4. Only use Application
Override when you must and in the most highly trusted environments where
you can apply the principle of least privilege strictly. For more
details, see Application Override.
Authentication
Identify traffic that requires users to
authenticate. For more details, see Authentication
Policy.
DoS Protection
Identify potential denial-of-service (DoS)
attacks and take protective action in response to rule matches.
For more details, see DoS
Protection Profiles.
