PAN-OS 10.1.10-h1 Addressed Issues
Table of Contents
Expand All
|
Collapse All
Next-Generation Firewall Docs
-
-
- Cloud Management of NGFWs
- PAN-OS 10.0 (EoL)
- PAN-OS 10.1
- PAN-OS 10.2
- PAN-OS 11.0
- PAN-OS 11.1
- PAN-OS 9.1
-
- PAN-OS 10.1
- PAN-OS 10.2
- PAN-OS 11.0
- PAN-OS 11.1
-
-
-
- Cloud Management and AIOps for NGFW
- PAN-OS 10.0 (EoL)
- PAN-OS 10.1
- PAN-OS 10.2
- PAN-OS 11.0
- PAN-OS 11.1
- PAN-OS 8.1 (EoL)
- PAN-OS 9.0 (EoL)
- PAN-OS 9.1
PAN-OS 10.1.10-h1 Addressed Issues
PAN-OSĀ® 10.1.10-h1 addressed issues.
Issue ID
| Description
|
|---|---|
PAN-223317 | Fixed an issue where SSL traffic failed with the error message:
Error: General TLS protocol
error . |
PAN-219659 | Fixed an issue where root partition frequently filled up and the
following error message was displayed: Disk usage for
/ exceeds limit, xx percent in use, cleaning
filesystem . |
PAN-218947 | Fixed an issue where logs were not displayed in Elasticsearch under
ingestion load. |
PAN-218335 | Fixed an issue with hardware destination MAC filtering on the Log
Processing Card (LPC) that caused the logging card interface to be
susceptible to unicast flooding. |
PAN-218001 | ( PA-400 Series firewalls only ) Fixed an issue where shutdown
commands rebooted the system instead of correctly triggering a
shutdown. |
PAN-217681 | Fixed an issue caused by out of order TCP segments where the FIN flag
and TCP data was truncated in a packet, which resulted in
retransmission failure. |
PAN-217477 | Fixed an issue where the drop counter was incremented incorrectly.
Drop counter calculations did not account for failures to send out
logs from logrcvr/logd to syslog-ng. |
PAN-217169 | Fixed an issue where the logrcvr stopped forwarding logs to the
syslog server after a restart or crash. |
PAN-216984 | Fixed an issue where internal path monitoring failed due to the
sysdagent not responding. |
PAN-215911 | Fixed an issue that resulted in a race condition, which caused the
configd process to stop responding. |
PAN-215808 | Fixed an issue where, after upgrading to PAN-OS 10.1, the log
forwarding rate towards the syslog server was reduced. With this
fix, the overall log-forwarding rate has also been improved. |
PAN-215315 | Fixed an issue where the dataplane stopped responding due to ager and
inline packet processing occurring concurrently on different cores
for the same session. |
PAN-214990 | Fixed an issue where firewall copper ports flapped intermittently
when device telemetry was enabled. |
PAN-214815 | Fixed an issue where SNMP queries were not replied to due to an
internal process timeout. |
PAN-214187 | Fixed an issue where superreaders were able to execute the
request restart system CLI command. |
PAN-214026 | Fixed an issue where, when using an ECMP
weighted-round-robin algorithm,
traffic was not redistributed among the links proportionally as
expected from the configuration. |
PAN-212877 | Fixed an issue where a race condition caused log flooding, which
caused the firewall to go into an unresponsive state. |
PAN-211887 | Fixed an issue on Panorama that caused recently committed changes to
not be displayed when previewing the changes to push to device
groups. |
PAN-210740 | Fixed a memory leak issue related to the slotd
process. |
PAN-196116 | A new CLI command debug log-receiver param-tuning
syslog-threads to increase the number of processing
threads for syslog forwarding up to 16 was added to address an issue
where the syslog forwarding queue depth approached its limit and the
drop count increased. |
PAN-186579 | Fixed an issue where, after a hardware failure, the system log did
not include information about the failure. |
PAN-181724 | Fixed an issue where the Panorama or firewall page remained open
after the session expired and you were unable to perform additional
actions. |
PAN-172853 | Fixed an issue where Panorama appliances running a PAN-OS 10.0
release did not push the Security policy options
no-hip and
quarantine to firewalls running PAN-OS
9.1. |