PAN-OS 10.1.11-h4 Addressed Issues
Table of Contents
Expand All
|
Collapse All
Next-Generation Firewall Docs
-
Cloud Management of NGFWs
- Cloud Management of NGFWs
- PAN-OS 10.0 (EoL)
- PAN-OS 10.1
- PAN-OS 10.2
- PAN-OS 11.0 (EoL)
- PAN-OS 11.1 & Later
- PAN-OS 9.1 (EoL)
-
-
-
- Configure a Filter Access List
- Configure a Filter Prefix List
- Configure a Filter Community List
- Configure a BGP Filter Route Map
- Configure a Filter Route Maps Redistribution List
- Configure a Filter AS Path Access List
- Configure an Address Family Profile
- Configure a BGP Authentication Profile
- Configure a BGP Redistribution Profile
- Configure a BGP Filtering Profile
- Configure an OSPF Authentication Profile
- Configure a Logical Router
- Configure a Static Route
- Configure OSPF
- Configure BGP
- Configure an IPSec Tunnel
- Web Proxy
- Cheat Sheet: GlobalProtect for Cloud Management of NGFWs
-
PAN-OS 10.1
- PAN-OS 10.1
- PAN-OS 10.2
- PAN-OS 11.0 (EoL)
- PAN-OS 11.1 & Later
-
- Tap Interfaces
-
- Layer 2 and Layer 3 Packets over a Virtual Wire
- Port Speeds of Virtual Wire Interfaces
- LLDP over a Virtual Wire
- Aggregated Interfaces for a Virtual Wire
- Virtual Wire Support of High Availability
- Zone Protection for a Virtual Wire Interface
- VLAN-Tagged Traffic
- Virtual Wire Subinterfaces
- Configure Virtual Wires
- Configure an Aggregate Interface Group
- Configure Bonjour Reflector for Network Segmentation
- Use Interface Management Profiles to Restrict Access
-
- DNS Overview
- DNS Proxy Object
- DNS Server Profile
- Multi-Tenant DNS Deployments
- Configure a DNS Proxy Object
- Configure a DNS Server Profile
- Use Case 1: Firewall Requires DNS Resolution
- Use Case 2: ISP Tenant Uses DNS Proxy to Handle DNS Resolution for Security Policies, Reporting, and Services within its Virtual System
- Use Case 3: Firewall Acts as DNS Proxy Between Client and Server
- DNS Proxy Rule and FQDN Matching
-
- NAT Rule Capacities
- Dynamic IP and Port NAT Oversubscription
- Dataplane NAT Memory Statistics
-
- Translate Internal Client IP Addresses to Your Public IP Address (Source DIPP NAT)
- Enable Clients on the Internal Network to Access your Public Servers (Destination U-Turn NAT)
- Enable Bi-Directional Address Translation for Your Public-Facing Servers (Static Source NAT)
- Configure Destination NAT with DNS Rewrite
- Configure Destination NAT Using Dynamic IP Addresses
- Modify the Oversubscription Rate for DIPP NAT
- Reserve Dynamic IP NAT Addresses
- Disable NAT for a Specific Host or Interface
-
- Network Packet Broker Overview
- How Network Packet Broker Works
- Prepare to Deploy Network Packet Broker
- Configure Transparent Bridge Security Chains
- Configure Routed Layer 3 Security Chains
- Network Packet Broker HA Support
- User Interface Changes for Network Packet Broker
- Limitations of Network Packet Broker
- Troubleshoot Network Packet Broker
-
-
PAN-OS 10.1
- Cloud Management and AIOps for NGFW
- PAN-OS 10.0 (EoL)
- PAN-OS 10.1
- PAN-OS 10.2
- PAN-OS 11.0 (EoL)
- PAN-OS 11.1
- PAN-OS 11.2
- PAN-OS 8.1 (EoL)
- PAN-OS 9.0 (EoL)
- PAN-OS 9.1 (EoL)
PAN-OS 10.1.11-h4 Addressed Issues
PAN-OS® 10.1.11-h4 addressed issues.
Issue ID
|
Description
|
---|---|
PAN-237935
|
Extended the offline PAN-DB, Panorama, and WildFire certificates
which were previously set to expire on September 2, 2024.
|
PAN-237876
|
Extended the firewall Panorama root CA certificate which was
previously set to expire on April 7th, 2024.
|
PAN-235585
|
Fixed an issue where, when custom signatures and predefined
signatures shared the same literal pattern part, the custom
signature caused an incorrect calculation for the length of the
predefined signature, which resulted in App-ID not detected
correctly.
|
PAN-234929
| Fixed an issue where tabs in the ACC such as Network Activity Threat Activity and Blocked Activity did not display data when you applied a Time filter of Last 15 Minutes, Last Hour, Last 6 Hours, or Last 12 Hours, and the data that was displayed with the Last 24 Hours filter was not accurate. Reports that were run against summary logs also did not display accurate results. |
PAN-234238
|
Fixed an issue where a Security policy that referenced more than 30
HIP profiles caused buffer overflow, which caused other Security
policies with HIP profiles to misidentified users and traffic was
denied.
|
PAN-232132
|
Fixed an issue where DNS response packets were malformed when an
Anti-Spyware Security Profile was enabled.
|
PAN-231658
|
Fixed an issue where DNS resolution failed when interfaces were
configured as DHCP and a DNS server was provided via DHCP while also
statically configured with DNS servers.
|
PAN-231552 |
Fixed an issue where traffic returning from a third-party Security
chain was dropped.
|
PAN-230106
|
Fixed an issue where the firewall was unable to retrieve the most
current external dynamic list information from the server due to
hostname resolution failure.
|
PAN-228877
|
(PA-7050 firewalls only) Fixed an issue with out-of-memory
(OOM) conditions which caused slot restarts due to
pan_cmd consuming more than
300MB.
|
PAN-227539
|
Fixed an issue where excess WIF process memory use caused processes
to restart due to OOM conditions.
|
PAN-226792
|
Fixed an issue where the logrcvr process stored older
content versions in the shared memory even when newer content
updates were installed.
|
PAN-224954
|
Fixed an issue where, after upgrading and rebooting a Panorama
appliance in Panorama or Log Collector mode, managed firewalls
continuously disconnected.
|
PAN-222002
|
Fixed an issue where content updates failed with the error message
Unable to get key pancontent-8.0.pass from
cryptod. Error -9.
|
PAN-221881
|
Fixed an issue where log ingestion to Panorama failed, which resulted
in missing logs under the Monitor tab.
|
PAN-220790
|
Fixed an issue where the reportd process stopped
responding, which caused Panorama to restart.
|
PAN-215576
|
Fixed an issue where the userID-Agent
and TS-Agent certificates were set to
expire on November 18, 2024. With this fix, the expiration date has
been extended to January 2032.
|
PAN-208400
|
Fixed an issue where pushing dynamic objects to the firewall did not
send all Panorama objects that matched the dynamic object filter
when Share Unused Address and Service Objects with
Device was selected on Panorama.
|