: Cluster Config
Focus
Focus

Cluster Config

Table of Contents
End-of-Life (EoL)

Cluster Config

Add members of an HA cluster.
  • Device > High Availability > Cluster Config
Add members to an HA cluster by selecting
Device
High Availability
Cluster Config
.
Cluster Config
Description
Add
Add
a cluster member. You must add the local firewall and if you are using HA pairs, you must add both HA peers of the pair as cluster members.
  • (
    Supported firewalls
    )
    Device Serial Number
    —Enter the unique serial number of the cluster member.
  • (
    Panorama
    )
    Device
    —Select a device from the dropdown and enter a
    Device Name
    .
  • HA4 IP Address
    —Enter the IP address of the HA4 link for the cluster member.
  • HA4 Backup IP Address
    —Enter the IP address of the backup HA4 link for the cluster member.
  • Session Synchronization
    —Select to enable session synchronization with this cluster member.
  • Description
    —Enter helpful description.
Delete
Select one or more cluster members and
Delete
them from the cluster.
Enable
(
Supported firewalls
) You can determine whether or not a cluster member synchronizes sessions with other members. By default, all members are allowed to synchronize sessions. If you disable synchronization for one or more members, select
Enable
to re-enable synchronization for one or more members.
Disable
(
Supported firewalls
) Select one or more members and
Disable
synchronization with other members.
Refresh
(
Panorama
) Select
Refresh
to refresh the list of HA devices in the HA cluster.

Recommended For You