Focus

PAN-OS Web Interface Help

Trace Route

Table of Contents

Trace Route

Trace route connection test fields in the web interface.

Field	Description
Select Test	Select the connectivity test to execute.
(`Panorama only`) Select device	Select device/VSYS to specify which devices and virtual systems for which to test the policy functionality. Admin and device group & Template users are presented with the devices and virtual systems based on their access domain. Additionally, you can select the Panorama management server as a device.
(`Panorama only`) Selected Devices	Lists the devices and virtual systems selected for testing.
Use IPv4	Enable to use the IPv4 address of the selected devices.
Use IPv6	Enable to use the IPv6 address of the selected devices.
First TTL	Enter the time-to-live used in the first outgoing probe packet (range is 1 to 255).
Max TTL	Enter the maximum time-to-live hops (range is 1 to 255).
Port	Enter the base port number used in probe.
ToS	Enter the IP type-of-service value (range is 1 to 255).
Wait	Enter the number of seconds to wait for a response (range is 1 to 99,999).
Pause	Enter the time, in milliseconds, to pause between probes (range is 1 to 2,000,000,000).
Set the “don’t fragment” bit	Enable this option to not fragment the ICMP packet in to multiple packets if the path cannot support the configured maximum transmission unit (MTU).
Enable socket level debugging	Enable this option to allows you to debug on the socket level.
Gateway	Specify a maximum of 8 loose source route gateways.
Don’t attempt to print addresses symbolically	Enable this option to display IP addresses in test results and not resolve the IP address hostname. Disable (clear) to resolve IP address hostnames.
Bypass routing tables and send directly to a host	Enable this option to bypass any configured routing tables and test directly with the host.
Source	Enter a source address in outgoing probe packets.
Host	Enter the hostname or IP address of the remote host.
Results	Select to view the Result Details of the executed test. (`Panorama only`) When executing the test for multiple managed devices, the Results display the following information for each device tested: Device Group—Name of the device group to which the firewall that is processing traffic belongs. Firewall—Name of the firewall that is processing traffic Status—Indicates the status of the test: Success or Failure. Result—Displays the test result. If the test could not be performed, one of the following is displayed: N/A—Test was not applicable to the device. Device not connected—Device connection was dropped.

Log Collector Connectivity