: Application Override Protocol/Application Tab
Focus
Focus

Application Override Protocol/Application Tab

Table of Contents
End-of-Life (EoL)

Application Override Protocol/Application Tab

Select the
Protocol/Application
tab to define the protocol (TCP or UDP), port, and application that further defines the attributes of the application for the policy match.
Field
Description
Protocol
Select the protocol (
TCP
or
UDP
) for which to allow an application override.
Port
Enter the port number (0 to 65535) or range of port numbers (port1-port2) for the specified destination addresses. Multiple ports or ranges must be separated by commas.
Application
Select the override application for traffic flows that match the above rule criteria. When overriding to a custom application, there is no threat inspection that is performed. The exception to this is when you override to a pre-defined application that supports threat inspection.
To define new applications, refer to Objects > Applications).

Recommended For You