: Device > Setup > DLP
Focus
Focus

Device > Setup > DLP

Table of Contents
End-of-Life (EoL)

Device > Setup > DLP

Configure the firewall setting for file uploads to the Enterprise Data Loss Prevention (DLP) cloud service.
  • Device
    Setup
    DLP
Configure the network settings for files scanned to the Enterprise Data Loss Prevention (DLP) cloud service.
Field
Description
Max Latency (sec)
Specify the maximum latency in seconds (between
1
and
240
) for a file upload before an action is taken by the firewall. Default is
60
.
Action on Max Latency
Specify the action the firewall takes when a file upload latency reaches the configured
Max Latency
.
  • Allow
    (default)— Firewall allows a file upload to continue to the DLP cloud service when the maximum latency is reached.
  • Block
    —Firewall blocks a file upload to the DLP cloud service that reaches the configured maximum latency.
Max File Size (MB)
Enforce a maximum file size (between
1
and
20
) for upload to the DLP cloud service. Default is
20
.
Action on Max File Size
Specify the action the firewall takes when a file upload reaches the configured
Max File Sized
.
  • Allow
    (default)— Firewall allows a file upload to continue to the DLP cloud service if the file is the configured maximum file size.
  • Block
    —Firewall blocks a file upload to the DLP cloud service if the file is the configured maximum file size.
Log Files Not Scanned
Check (enable) to generate an alert in the data filtering log when a file could not be uploaded to the DLP cloud service.
Action on any Error
Specify the action the firewall takes when an error is encountered during a file upload to the DLP cloud service.
  • Allow
    (default)— Firewall allows a file upload to continue to the DLP cloud service if an error is encountered during upload.
  • Block
    —Firewall blocks a file upload to the DLP cloud service if an error is encountered during upload.

Recommended For You