: Network > Network Profiles > SD-WAN Interface Profile
Focus
Focus

Network > Network Profiles > SD-WAN Interface Profile

Table of Contents
End-of-Life (EoL)

Network > Network Profiles > SD-WAN Interface Profile

Create an SD-WAN Interface Profile to group physical links by Link Tag and to control the speed of links and how frequently the firewall monitors the link.
SD-WAN Interface Profile
Name
Enter the name of the SD-WAN Interface Profile using a maximum of 31 alphanumeric characters. The name must begin with an alphanumeric character and can contain letters, numbers, underscores (_), hyphens (-), periods (.), and spaces.
Link Tag
Select the Link Tag that this profile will assign to the interface or add a new tag. A link tag bundles physical links (different ISPs) for the firewall to select from during path selection and failover.
Description
It is a best practice to enter a user-friendly description of the profile.
Link Type
Select the physical link type from the predefined list (
ADSL/DSL
,
Cable Modem
,
Ethernet
,
Fiber
,
LTE/3G/4G/5G
,
MPLS
,
Microwave/Radio
,
Satellite
,
WiFi
, or
Other
). The firewall can support any CPE device that terminates and hands off as an Ethernet connection to the firewall; for example, WiFi access points, LTE modems, laser-microwave CPEs all can terminate with an Ethernet hand-off.
Maximum Download (Mbps)
Enter the maximum download speed from the ISP in megabits per second; range is 1 to 100,000, there is no default value. Ask your ISP for the link speed or sample the link’s maximum speeds with a tool such as speedtest.net and take an average of the maximums over a good length of time.
Maximum Upload (Mbps)
Enter the maximum upload speed from the ISP in megabits per second; range is 1 to 100,000, there is no default value. Ask your ISP for the link speed or sample the link’s maximum speeds with a tool such as speedtest.net and take an average of the maximums over a good length of time.
Eligible for Error Correction Profile interface selection
Select this setting to make interfaces (where you apply this profile) eligible for the encoding firewall to select them for Forward Error Correction (FEC) or packet duplication. You can deselect this setting so that expensive FEC or packet duplication is never used on an expensive link (interface) where you apply the profile. The
Link Type
specified for the profile determines whether the default setting of
Eligible for Error Correction Profile interface selection
is selected or not.
To configure FEC or packet duplication, create an SD-WAN Error Correction Profile.
VPN Data Tunnel Support
Determines whether the branch-to-hub traffic and the return traffic flows through a VPN tunnel for added security (enabled by default) or flows outside of the VPN tunnel to avoid encryption overhead.
  • Leave
    VPN Data Tunnel Support
    enabled for public link types that have direct internet connections or internet breakout capability, such as cable modem, ADSL, and other internet connections.
  • You can disable
    VPN Data Tunnel Support
    for private link types such as MPLS, satellite, or microwave that do not have internet breakout capability. However, you must first ensure the traffic cannot be intercepted because it will be sent outside of the VPN tunnel.
  • The branch many have DIA traffic that needs to fail over to the private MPLS link connecting to the hub, and reach the internet from the hub. The
    VPN Data Tunnel Support
    setting determines whether the private data flows through the VPN tunnel or flows outside the tunnel, and the failed over traffic uses the other connection (that the private data flow doesn’t use). The firewall uses zones to segment DIA failover traffic from private MPLS traffic.
VPN Failover Metric
(
PAN-OS 10.0.3 and later 10.0 releases
) When you configure DIA AnyPath, you need a way to specify the failover order of individual VPN tunnels bundled in a hub virtual interface or branch virtual interface to which DIA fails over. Specify the VPN Failover Metric for the VPN tunnel (link); range is 1 to 65,535; default is 10. The lower the metric value, the higher the priority of the tunnel (link where you apply this profile) to be chosen during failover.
For example, set the metric to a low value and apply the profile to a broadband interface; then create a different profile that sets a high metric to apply to an expensive LTE interface to ensure it is used only after broadband has failed over.
Path Monitoring
Select the path monitoring mode in which the firewall monitors the interfaces where you apply this SD-WAN Interface Profile.
  • Aggressive
    —(default for all link types except LTE and Satellite) Firewall sends probe packets to the opposite end of the SD-WAN link at a constant frequency.
    Use Aggressive mode if you need fast detection and failover for brownout and blackout conditions.
  • Relaxed
    —(default for LTE and Satellite link types) Firewall waits for a number of seconds (the
    Probe Idle Time
    ) between sending sets of probe packets, making path monitoring less frequent. When the Probe Idle Time expires, the firewall sends probes for seven seconds at the
    Probe Frequency
    configured.
    Use Relaxed mode when you have low bandwidth links, links that charge by usage (such as LTE), or when fast detection isn’t as important as preserving cost and bandwidth.
Probe Frequency (per second)
Enter the probe frequency, which is the number of times per second that the firewall sends a probe packet to the opposite end of the SD-WAN link (range is 1 to 5; default is 5).
Probe Idle Time (seconds)
If you select
Relaxed
path monitoring, you can set the probe idle time (in seconds) that the firewall waits between sets of probe packets (range is 1 to 60; default is 60).
Failback Hold Time (seconds)
Enter the length of time (in seconds) that the firewall waits for a recovered link to remain qualified before the firewall reinstates that link as the preferred link after it has failed over (range is 20 to 120; default is 120). The failback hold time prevents a recovered link from being reinstated as the preferred link too quickly and having it fail again right away.

Recommended For You