: Application Override Source Tab
Focus
Focus

Application Override Source Tab

Table of Contents
End-of-Life (EoL)

Application Override Source Tab

Select the
Source
tab to define the source zone or source address that defines the incoming source traffic to which the application override policy will be applied.
Field
Description
Source Zone
Add
source zones (default is
any
). Zones must be of the same type (Layer 2, Layer 3, or virtual wire). To define new zones, refer to Network > Zones.
Multiple zones can be used to simplify management. For example, if you have three different internal zones (Marketing, Sales, and Public Relations) that are all directed to the untrusted destination zone, you can create one rule that covers all cases.
Source Address
Add
source addresses, address groups, or regions (default is
any
). Select from the drop-down, or click
Address
,
Address Group
, or
Regions
at the bottom of the drop-down, and specify the settings.
Select
Negate
to choose any address except the configured ones.

Recommended For You