: Client IP Pool Tab
Focus
Focus

Client IP Pool Tab

Table of Contents
End-of-Life (EoL)

Client IP Pool Tab

  • Network
    GlobalProtect
    Gateways
    <gateway-config>
    Agent
    <agent-config>
    Client IP Pool
Select the
Client IP Pool
tab to configure the global IP pool that is used to assign IPv4 or IPv6 addresses to all endpoints that connect to the GlobalProtect™ gateway.
GlobalProtect Gateway Client IP Pool Configuration Settings
Description
IP Pool
Add
a range of IPv4 or IPv6 addresses to assign to remote users. After establishing the tunnel, the GlobalProtect gateway allocates IP addresses in this range to all endpoints that connect through that tunnel.
If you configure IP pools at the gateway level (
Network
GlobalProtect
Gateways
<gateway-config>
GlobalProtect Gateway Configuration
Agent
Client IP Pool
), do not configure any IP pools at the client level (
Network
GlobalProtect
Gateways
<gateway-config>
GlobalProtect Gateway Configuration
Agent
Client Settings
<client-setting>
Configs
IP Pools
).

Recommended For You