Focus

PAN-OS Web Interface Help

Building Blocks of Security Zones

Table of Contents

Building Blocks of Security Zones

To define a security zone, click Add and specify the following information.

Security Zone Settings	Description
Name	Enter a zone name (up to 31 characters). This name appears in the list of zones when defining security policies and configuring interfaces. The name is case-sensitive and must be unique within the virtual router. Use only letters, numbers, spaces, hyphens, periods, and underscores.
Location	This field is present only if the firewall supports multiple virtual systems (vsys) and that capability is enabled. Select the vsys to which this zone applies.
Type	Select a zone type (Tap, Virtual Wire, Layer2, Layer3, External, or Tunnel) to view all the Interfaces of that type that have not been assigned to a zone. The Layer 2 and Layer 3 zone types list all Ethernet interfaces and subinterfaces of that type. Add the interfaces that you want to assign to the zone. The External zone is used to control traffic between multiple virtual systems on a single firewall. It displays only on firewalls that support multiple virtual systems and only if the Multi Virtual System Capability is enabled. For information on external zones see,Inter-VSYS Traffic That Remains Within the Firewall. An interface can belong to only one zone in one virtual system.
Interfaces	Add one or more interfaces to this zone.
Zone Protection Profiles	Select a profile that specifies how the firewall responds to attacks from this zone. To create a new profile, see Network > Network Profiles > Zone Protection. The best practice is to defend each zone with Zone Protection profile.
Enable Packet Buffer Protection	Configure Packet Buffer Protection (Device > Setup > Session) globally and apply it to each zone. The firewall applies Packet Buffer Protection to the ingress zone only. Packet Buffer Protection based on buffer utilization percentage is enabled by default. An alternative is to configure Packet Buffer Protection based on latency. It is a best practice to enable Packet Buffer Protection on each zone to protect the firewall buffers.
Log Setting	Select a Log Forwarding profile for forwarding zone protection logs to an external system. If you have a Log Forwarding profile named default, that profile will be automatically selected for this drop-down when defining a new security zone. You can override this default setting at any time by continuing to select a different Log Forwarding profile when setting up a new security zone. To define or add a new Log Forwarding profile (and to name a profile default so that this drop-down is populated automatically), click New (refer to Objects > Log Forwarding). If you are configuring the zone in a Panorama template, the Log Setting drop-down lists only shared Log Forwarding profiles; to specify a non-shared profile, you must type its name.
Enable User Identification	If you configured User-ID™ to perform IP address-to-username mapping (discovery), the best practice is to Enable User Identification to apply the mapping information to traffic in this zone. If you disable this option, firewall logs, reports, and policies will exclude user mapping information for traffic within the zone. By default, if you select this option, the firewall applies user mapping information to the traffic of all subnetworks in the zone. To limit the information to specific subnetworks within the zone, use the Include List and Exclude List. Enable User-ID on trusted zones only. If you enable User-ID and client probing on an external untrusted zone (such as the internet), probes could be sent outside your protected network, resulting in an information disclosure of the User-ID agent service account name, domain name, and encrypted password hash, which could allow an attacker to gain unauthorized access to protected resources. User-ID performs discovery for the zone only if it falls within the network range that User-ID monitors. If the zone is outside that range, the firewall does not apply user mapping information to the zone traffic even if you select Enable User Identification. For details, see Include or Exclude Subnetworks for User Mapping.
User Identification ACL Include List	By default, if you do not specify subnetworks in this list, the firewall applies the user mapping information it discovers to all the traffic of this zone for use in logs, reports, and policies. To limit the application of user mapping information to specific subnetworks within the zone, then for each subnetwork click Add and select an address (or address group) object or type the IP address range (for example, 10.1.1.1/24). The exclusion of all other subnetworks is implicit because the Include List is an allow list, so you do not need to add them to the Exclude List. Add entries to the Exclude List only to exclude user mapping information for a subset of the subnetworks in the Include List. For example, if you add 10.0.0.0/8 to the Include List and add 10.2.50.0/22 to the Exclude List, the firewall includes user mapping information for all the zone subnetworks of 10.0.0.0/8 except 10.2.50.0/22, and excludes information for all zone subnetworks outside of 10.0.0.0/8. You can only include subnetworks that fall within the network range that User-ID monitors. For details, see Include or Exclude Subnetworks for User Mapping.
User Identification ACL Exclude List	To exclude user mapping information for a subset of the subnetworks in the Include List, Add an address (or address group) object or type the IP address range for each subnetwork to exclude. If you add entries to the Exclude List but not the Include List, the firewall excludes user mapping information for all subnetworks within the zone, not just the subnetworks you added.

Security Zone Overview

Network > VLANs