: Policy Based Forwarding Destination/Application/Service Tab
Focus
Focus

Policy Based Forwarding Destination/Application/Service Tab

Table of Contents
End-of-Life (EoL)

Policy Based Forwarding Destination/Application/Service Tab

Select the
Destination/Application/Service
tab to define the destination settings that will be applied to traffic that matches the forwarding rule.
Field
Description
Destination Address
Click
Add
to add destination addresses or address groups (default is any). By default, the rule applies to
Any
IP address. Select from the drop-down, or click
Address
or
Address Group
at the bottom of the drop-down, and specify the settings.
Application/Service
Select specific applications or services for the PBF rule. To define new applications, refer to Defining Applications. To define application groups, refer to Objects > Application Groups.
Application-specific rules are not recommended for use with PBF. Whenever possible, use a service object, which is the Layer 4 port (TCP or UDP) used by the protocol or application.
You can view details on these applications by holding your mouse over the object in the
Application
column, clicking the down arrow, and selecting
Value
. This enables you to easily view application information directly from the policy without having to go to the Object tabs.
You cannot use custom applications, application filters, or application groups in PBF rules.

Recommended For You