: Panorama > Access Domains
Focus
Focus

Panorama > Access Domains

Table of Contents
End-of-Life (EoL)

Panorama > Access Domains

Access domains control the access that Device Group and Template administrators have to specific device groups (to manage policies and objects), to templates (to manage network and device settings), to the web interface of managed firewalls (through context switching), and to the REST API of managed firewalls. You can define up to 4,000 access domains and manage them locally or by using RADIUS Vendor-Specific Attributes (VSAs), TACACS+ VSAs, or SAML attributes. To create an access domain,
Add
a domain and configure the settings as described in the following table.
Access Domain Settings
Description
Name
Enter a name for the access domain (up to 31 characters). The name is case-sensitive, must be unique, and can contain only letters, numbers, hyphens, and underscores.
Shared Objects
Select one of the following access privileges for the objects that device groups in this access domain inherit from the Shared location. Regardless of privilege, administrators can’t override shared or default (predefined) objects.
  • read
    —Administrators can display and clone shared objects but cannot perform any other operations on them. When adding non-shared objects or cloning shared objects, the destination must be a device group within the access domain, not Shared.
  • write
    —Administrators can perform all operations on shared objects. This is the default value.
  • shared-only
    —Administrators can add objects only to Shared. Administrators can also display, edit, and delete shared objects but cannot move or clone them. A consequence of this selection is that administrators cannot perform any operations on non-shared objects other than to display them.
Device Groups
Enable or disable read-write access for specific device groups in the access domain. You can also click
Enable All
or
Disable All
. Enabling read-write access for a device group automatically enables the same access for its descendants. If you manually disable a descendant, access for its highest ancestor automatically changes to read-only. By default, access is disabled for all device groups.
If you want the list to display only specific device groups, select the device group names and
Filter Selected
.
If you set the access for shared objects to
shared-only
, Panorama applies read-only access to any device groups for which you specify read-write access.
Templates
For each template or template stack you want to assign, click
Add
and select it from the drop-down.
Device Context
(
Corresponds to the Device/Virtual Systems column in the Access Domain page
)
Select the firewalls to which the administrator can switch context for performing local configuration. If the list is long, you can filter by
Device State
,
Platforms
,
Device Groups
,
Templates
,
Tags
, and
HA Status
.
Log Collector Groups
For each Collector Group you want to assign,
Add
and select it from the drop-down.

Recommended For You