Select Test

Select the connectivity test to execute.

(

Panorama only

) Select device

Select device/VSYS

to specify which devices and virtual systems for which to test the policy functionality. Admin and device group & Template users are presented with the devices and virtual systems based on their access domain. Additionally, you can select the Panorama management server as a device.

(

Panorama only

) Selected Devices

Lists the devices and virtual systems selected for testing.

Use IPv4

Enable to use the IPv4 address of the selected devices.

Use IPv6

Enable to use the IPv6 address of the selected devices.

First TTL

Enter the time-to-live used in the first outgoing probe packet (range is 1 to 255).

Max TTL

Enter the maximum time-to-live hops (range is 1 to 255).

Port

Enter the base port number used in probe.

ToS

Enter the IP type-of-service value (range is 1 to 255).

Wait

Enter the number of seconds to wait for a response (range is 1 to 99,999).

Pause

Enter the time, in milliseconds, to pause between probes (range is 1 to 2,000,000,000).

Set the “don’t fragment” bit

Enable this option to not fragment the ICMP packet in to multiple packets if the path cannot support the configured maximum transmission unit (MTU).

Enable socket level debugging

Enable this option to allows you to debug on the socket level.

Gateway

Specify a maximum of 8 loose source route gateways.

Don’t attempt to print addresses symbolically

Enable this option to display IP addresses in test results and not resolve the IP address hostname. Disable (clear) to resolve IP address hostnames.

Bypass routing tables and send directly to a host

Enable this option to bypass any configured routing tables and test directly with the host.

Source

Enter a source address in outgoing probe packets.

Host

Enter the hostname or IP address of the remote host.