GlobalProtect Portals General Tab
- NetworkGlobalProtectPortals<portal-config>General
Select the
General
tab to define the network
settings that the GlobalProtect app uses to connect to the GlobalProtect
portal. Optionally, you can disable the login page or specify a
custom portal login and help pages for GlobalProtect. For information
on how to create and import custom pages, refer to Customize the Portal Login, Welcome, and HelpPages in
the GlobalProtect Administrator’s Guide.GlobalProtect Portal
Settings | Description |
---|---|
Name | Type a name for the portal (up to 31 characters).
The name is case-sensitive and must be unique. Use only letters,
numbers, spaces, hyphens, and underscores. |
Location | For a firewall that is in multiple virtual
system mode, the Location is the virtual
system (vsys) where the GlobalProtect portal is available. For a
firewall that is not in multi-vsys mode, Location selection
is not available. After you save the portal, you cannot change Location . |
Network Settings | |
Interface | Select the name of the firewall interface
that will be the ingress for communications from remote endpoints
and firewalls. Do not attach an interface
management profile that allows Telnet, SSH, HTTP, or HTTPS to an
interface where you have configured a GlobalProtect portal or gateway
because this will expose the management interface to the internet.
Refer to Best Practices for Securing Administrative Access for
more details on how to protect access to your management network. |
IP Address | Specify the IP address on which to run the
GlobalProtect portal web service. Select the IP Address
Type and then enter the IP Address .
|
Log Settings | |
Log Successful SSL Handshake | ( Optional ) Creates detailed logs
of successful SSL Decryption handshakes. Disabled by default.Logs
consume storage space. Before you log successful SSL handshakes,
ensure you have the resources available to store the logs. Edit Device Setup Management Logging and Reporting Settings |
Log Unsuccessful SSL Handshake | Creates detailed logs of unsuccessful SSL
Decryption handshakes so you can find the cause of decryption issues.
Enabled by default. Logs consume storage space. To allocate
more (or less) log storage space to Decryption logs, edit the log
memory allocation ( Device Setup Management Logging and Reporting Settings |
Log Forwarding | Specify the method and location to forward
GlobalProtect SSL handshake (decryption) logs. |
Appearance | |
Portal Login Page | ( Optional ) Choose a custom login
page for user access to the portal. You can select the factory-default page
or Import a custom page. The default is None .
To prevent access to this page from a web browser, Disable this
page. |
Portal Landing Page | ( Optional ) Choose a custom landing
page for the portal. You can select the factory-default page
or Import a custom page. The default is None . |
App Help Page | ( Optional ) Choose a custom help
page to assist the user with GlobalProtect. You can select the factory-default page
or Import a custom page. The factory-default help
page is provided with the GlobalProtect app software. If you select
a custom help page, the GlobalProtect portal provides the help page
with the GlobalProtect portal configuration. When you leave the default
value of None , the GlobalProtect app suppresses
the page and removes the option from the menu. |
Recommended For You
Recommended Videos
Recommended videos not found.