Network > Routing > Logical Routers

Configure a logical router to obtain routes to other subnets using either static routes or BGP.
The firewall requires a logical router to obtain routes to other subnets either using static routes that you manually define, or through participation in Layer 3 routing protocols (dynamic routes). Each Layer 3 interface, loopback interface, and VLAN interface defined on the firewall must be associated with a logical router. Each interface can belong to only one logical router.
The logical router is available after you enable
Advanced Routing
in the General Settings of
and then commit and reboot the firewall.
The Advanced Route Engine is currently in preview mode only and provides a limited feature set.
Defining a logical router requires that you add Layer 3 interfaces to the logical router and configure any combination of static routes and BGP routing, as required by your network. You can also configure other features, such as ECMP.
What are you looking for?
Required elements of a logical router
View information about a logical router.

Recommended For You