Configure and Attach a Collector Context to a Device Interface in IPFIX
Table of Contents
Configure and Attach a Collector Context to a Device Interface in IPFIX
A collector context is an ID to associate with an interface of the ION device. We can
configure and assign a collector context in IPFIX Prisma SD-WAN.
A collector context is an optional ID to associate
with an interface of the ION device. The interface acts as the source
interface for the IPFIX packets exported from the ION device to
the collector.
- Select .
- Enter anameand an optionaldescriptionandSavethe collector context.You need to attach the collector context to an interfaceon the ION device to designate the interface as a source interface for exporting IPFIX packets.(Optional)Use the IPFIX collector context when configuring a collector as part of either an IPFIX profile or when configuring IPFIX profile overrides on the device.You can define multiple collectors that use the same collector context, but you can assign the IPFIX collector context to only one interface of an ION device.
Attach a Collector Context to a Device Interface
Attach a collector context to an ION device interface to configure the device
interface as a source interface for exporting flow records. You cannot attach a
collector context to more than one interface on the same device, however you can
reuse the collector context for different devices.
If you do not bind a collector context to an interface, the device uses
the controller port by default to establish the connection with the
third-party collector. For platforms that do not have a controller port,
it is mandatory to specify a collector context and bind it to an
interface. Otherwise, the device raises a major alarm
DEVICE_SW_IPFIX_COLLECTORS_DOWN
.The device raises the
DEVICE_SW_IPFIX_COLLECTORS_DOWN
major alarm only when it is not able to connect to any of the configured
collectors. There may be different collector configurations on a device that use
different collector contexts. If the device is able to connect to any of the
configured collectors, it will not raise the
DEVICE_SW_IPFIX_COLLECTORS_DOWN
alarm.There are two ways of attaching a collector context to a device.
- Select a collector context and assign it to a device interface.
- Select .
- Click the ellipsis icon for an IPFIX Collector Context, selectView Interface Bindings, and then clickBind Interfaces.
- Select a device and an interface to bind the collector context andSave.You can assign a collector context to any of the following interfaces:Interface TypeSupports Collector ContextControllerYesVirtual PortsYesLoopbackNoStandard VPNNoVirtual InterfacesYesPort ChannelNoSub-interfacesYesPPPoEYesBypass PairYes(Optional)Repeat the procedure to bind the collect context to an interface on another device.
- Select a device interface and then assign the collector context.
- Select .
- Select an interface to assign as a source interface for exporting flow records.
- Select a previously configuredIPFIX Collector ContextandSave.You can assign a collector context to only one interface of an ION device.