Focus

Prisma SD-WAN Administrator’s Guide

Configure Default Path Policy Rule for IPv6

Table of Contents

Configure Default Path Policy Rule for IPv6

Lets learn more about how to configure the default Path Policy Rule for IPv6 in

Prisma SD-WAN

.

Prisma SD-WAN

supports a default path policy rule for IPv6 starting with Release 6.2.1. Create a global prefix for IPv6 enterprise traffic and use it in the Path policy rule. Path Policy Rules use network contexts, applications, destination zones, prefixes, ports, and protocols.

Create a Global Prefix including for the IPv6 enterprise traffic.

Create a path policy rule as shown in the images below.

On the

Prefixes

tab, select the Source Prefix and Destination Prefix as shown in the image.

On the

Paths

tab, choose

Active/Backup/L3 Failure Paths

for the application from the drop-down list as shown in the image.

For release 6.2.1, only Direct on Any Private or

Prisma SD-WAN

on Any Public or Private paths are supported in Active Path. You cannot repeat a combination of an overlay and a circuit category for a policy rule.

Lastly, the

Summary

tab should have all the IPv6 configurations as shown in the image.

Create binding with the above created policy set:

Minimize Metered LTE Usage

Bind Path or QoS Stacks to Sites