Prisma SD-WAN ION CLI Reference
    : ping
    Focus
    Download PDF
    Focus
    1. Home
    2. Prisma
    3. Prisma SD-WAN
    4. Prisma SD-WAN ION CLI Reference
    5. Use CLI Commands
    6. Debug Commands
    7. ping
    Download PDF

    Prisma SD-WAN ION CLI Reference

    ping

    Table of Contents

    ping

    Use the
    ping
     command to test internet control message protocol (ICMP) reachability of a host and to troubleshoot network connectivity issues. It displays the network connectivity response and the time it takes to receive the response.

    Command

    ping interface host (args =" ")

    Options

    interface
    Enter the interface from which to send packets.
    host
    Enter the destination IP address or hostname.
    args= "-c number"
    Enter the number of pings to be displayed.
    args= "-s number"
    Enter the packet size. The default size is 56.
    args="-wnumber"
    Enter the number of seconds to wait to receive the first response after all the -c packets are sent. The default value is 10 seconds.
    args="-q"
    Quiet mode displays only the summary lines at the start and finish.

    Command Notes

    Role
    Super, Read Only
    Related Commands
    —
    Introduced in
    Release 4.4.1

    Example

    Example of ping which controls the count (-c) and the ping packet size (-s)
				ping controller1 8.8.8.8 args="-c 3 -s 1400"
				PING 8.8.8.8 (8.8.8.8): 1400 data bytes
				1408 bytes from 8.8.8.8: seq=0 ttl=59 time=50.710 ms
				1408 bytes from 8.8.8.8: seq=1 ttl=59 time=50.590 ms
				1408 bytes from 8.8.8.8: seq=2 ttl=59 time=50.568 ms

    Recommended For You

    © 2024 Palo Alto Networks, Inc. All rights reserved.