: dump interface status interface details
Focus
Focus

dump interface status interface details

Table of Contents

dump interface status interface details

Use the
dump interface status interface details
command to display the current details of a device interface.
The output changes based on whether the standard VPN is IPSec or GRE.

Command

dump interface status [ all | interface
interface name
] details

Options

all
Enter all to display status for all interfaces.
interface
Enter the
interface name
to display configuration for a specific interface.

Command Notes

Role
Super, Read Only, Monitor
Related Commands
dump interface status
Introduced in
Release 4.4.1

Example

dump interface config 1 Interface : 1 Description : NAT Config ID : 15670679352040140 Type : port Used For : private Admin State : up Alarms : enabled NetworkContextID: Scope : local MTU : 1500 IP : dhcp NatPoolID : 15603210612690114 IPv4Ranges : 10.10.10.20 - 10.10.10.22 NatZoneID : 15603213252200095 Wan ID : 15338838016530159 privatewan CircuitLabel : WAN-EASTERN PathLabel : WAN-EASTERN BW : manual, up 10.000000 down 30.000000 QoS : disabled LQM : enabled PCM : enabled dump interface config interface=ppp0 Interface : ppp91871660175 ID : 15024291871670177 Type : pppoe Admin State : up Alarms : enabled MTU : 0 IP : pppoe PPPOE User : test1 PPPOE Password : test$123 PPPOE Reconnect Delay : 0 dump interface config bvi-1 Interface : BVI-1 Description : BVI ID : 15734532300070135 Type : virtual_interface Used For : private Link #0 : 5 Link #1 : 6 Admin State : up Alarms : enabled NetworkContextID: Scope : local MTU : 1500 IP : dhcp dump interface config Server-NY-GRE-wCC Interface : Server-NY-GRE-wCC Description : GRE ID : 15666004852430198 Type : service_link (gre) Admin State : up Alarms : enabled NetworkContextID: Scope : local MTU : 1472 IP : static Address : 10.10.10.1/30 Parent Interface : 3 Parent Device : eth3 Peer : 10.16.12.148 Service Endpoint : GRE-SL-BGRE Checksum : disabled GRE Keepalives : enabled Interval : 10 Fail Count : 3 dump interface config Server-NY-IPSEC Interface : Server-NY-IPSEC Description : IPSEC ID : 15670047510280153 Type : service-link (ipsec) Used For : public Admin State : up Alarms : enabled NetworkContextID: Scope : local MTU : 1400 IP : static Address : 10.10.11.1/30 Parent Interface : 3 Parent Device : eth3 Peer : 10.16.12.148 Service Endpoint : IPSEC-SL-B Authentication Type : psk Local ID Type : local_ip Key Exchange : ikev2 IKE Reauth : no IKE Lifetime : 8 hours IKE Remote Port : 500 IKE DH Group/Encryption/Hash : modp1024/aes256/sha256 ESP Lifetime : 8 hours ESP Encapsulation : Auto ESP DH Group/Encryption/Hash : modp1024/aes256/sha256 DPD Enabled : yes DPD Delay : 30 DPD Timeout : 5 dump interface config 3 Interface : 3 Description: NAT Ports ID : 15035385483610095 Type : port Used For : public Admin State : up Alarms : enabled NetworkContextID: Scope : local MTU : 1500 IP : static. Address : 10.16.12.171/29 Route : 0.0.0.0/0 via 10.16.12.170 metric 0 DNS Server : 8.8.8.8 NatAddress: Port : 10.16.12.172:98765 NatZoneID : 15713885282360139 Wan ID : 15047410360100143 publicwan CircuitLabel : AT&T_ATLANTA PathLabel : AT&T_ATLANTA BW : manual, up 20.000000 down 40.000000 QoS : disabled LQM : enabled PCM : enabled

Recommended For You