: inspect wanpaths
Focus
Focus
Table of Contents

inspect wanpaths

Use the
inspect wanpaths
command to inspect the VPN WAN paths from the controller and displays all VPN WAN paths on a device sent by the controller.

Command

inspect wanpaths ( all | site-id = site id | path-id = path id )

Options

all
Enter all to display all VPN paths for a device.
site-id
Enter the site-id to display the VPN path for a specific site.
path-id
Enter the path-id to display a specific VPN path.

Command Notes

Role
Super, Read Only
Related Commands
Introduced in
Release 4.4.1

Example

inspect wanpaths all Path ID: 14903787743060209, Path Type: vpn, Site ID: 14810476033280153 Prefixes: 10.16.13.24/29, Cost: 1 0.0.0.0/0, Cost: 1 Path ID: 14903787806110119, Path Type: vpn, Site ID: 14810476033280153 Prefixes: 10.16.13.24/29, Cost: 1 0.0.0.0/0, Cost: 1 Path ID: 14903787820790032, Path Type: vpn, Site ID: 14810477231140214 Prefixes: 10.16.14.0/29, Cost: 1 Path ID: 14903787825540071, Path Type: vpn, Site ID: 14810476033280153 Prefixes: 10.16.13.24/29, Cost: 1 0.0.0.0/0, Cost: 1

Recommended For You