Addressed Issues in Prisma SD-WAN ION Device Release 6.3.4
Table of Contents
Expand All
|
Collapse All
Prisma SD-WAN Docs
-
-
-
-
- AWS Transit Gateway
- Azure vWAN
- Azure vWAN with vION
- ChatBot for MS Teams
- ChatBot for Slack
- CloudBlades Integration with Prisma Access
- GCP NCC
- Service Now
- Zoom QSS
- Zscaler Internet Access
-
-
- ION 5.2
- ION 5.3
- ION 5.4
- ION 5.5
- ION 5.6
- ION 6.0
- ION 6.1
- ION 6.2
- ION 6.3
- ION 6.4
- New Features Guide
- On-Premises Controller
- Prisma Access CloudBlade Cloud Managed
- Prisma Access CloudBlade Panorama Managed
- Prisma SD-WAN CloudBlades
Addressed Issues in Prisma SD-WAN ION Device Release 6.3.4
Learn about the issues addressed in Prisma SD-WAN ION device release
6.3.4.
The following table lists the issues addressed in Prisma SD-WAN ION
Device Release 6.3.4.
Issue ID | Description |
---|---|
CGSDW-19833 | Disabled NR5G SA mode and enabled NR5G NSA mode for 5G IPv6 connectivity. |
CGSDW-20234 | Resolved an issue where a virtual interface with sub-interfaces was not passing traffic. |
CGSDW-20824 | Reduced the downtime in tunnel establishment, such that the ION device re-initiates a new SA with the peer as soon as three tunnel probes fail. |
CGSDW-21115 | Resolved an issue where the FEC action was not being displayed in the Flow Browser for inbound (DC to branch) traffic. |
CGSDW-21176 | Resolved an issue where the SVI interface did not pass traffic. |
CGSDW-21320 | Resolved an issue where the ION device did not respond to DHCP until it was rebooted or there was a change in configuration. |
CGSDW-21512 |
Enabled default behavior for the bypass pair latch only in the
following scenarios:
|
CGSDW-22072 | Resolved an issue where the rtr_mgr_api process was holding a lot of memory. |
CGSDW-22192 | Resolved an issue where core files were being generated and the device was losing connectivity with the controller when traffic on the client side was abruptly stopped and restarted. |
CGSDW-22259 | Resolved an issue where SNMPv3 was not polling all the interfaces on the ION 9200 platform. |
CGSDW-22389 | Resolved an issue where the app probe remained operational after a firewall was removed from the active path. |
CGSDW-22633 | Fixed memory issues that were being caused due to security policy configuration. |
CGSDW-22700 | Resolved an issue where the branch ION device acting as a DHCP relay in a custom VRF configuration was not forwarding requests to the DHCP server at the DC ION device. |
CGSDW-23098 | Resolved an issue where overlapping IP addresses were not working as expected in VRF. |
CGSDW-23221 | Resolved an issue where the ionhwd process was consuming a lot of memory. |
CGSDW-23395 | Resolved an issue in which the backup ION device continued to attempt to establish a connection with the controller on an upgrade. |
CGSDW-23397 | Resolved an issue where the snmp_network_discovery service was restarting every hour on a device which had an attached SNMP discovery profile with an SNMPv3 configuration. |
CGSDW-23429 | Resolved an issue where the remote terminal connection was failing with the used_for_controller interface. |
CGSDW-23493 | Added CPLD reset reasons to the device reboot reasons for better troubleshooting. |
CGSDW-23534 | Resolved an issue where the Ingress displayed a zero value for Bandwidth Utilization. |
CGSDW-23608 | Optimized security policies to prevent the generation of core files for fp-rte. |
CGSDW-23705 | Resolved an issue where stale entries for VPN paths were being retained in the lqm_results.state database. |
CGSDW-23881 | Resolved an issue for a potential DDoS vulnerability wherein the flows now time out correctly. |
CGSDW-23921 | Resolved an issue where BGP sessions were not being re-established after a LAN switch reset for the ION 1200-S platform. |
CGSDW-23928 | Resolved an issue where the snmpwalk command was returning incorrect information. |
CGSDW-24099 | Increased the VRF scale for device interfaces. |
CGSDW-24112 | Resolved an issue where some packages were being skipped for HMAC integrity check during boot up. |
CGSDW-24262 | Resolved an issue where a route, which was not necessarily the best route, was getting selected as the reachable route. |
CGSDW-24269 | Resolved an issue where the APPLICATION_CUSTOM_RULE_CONFLICT incident was being raised for system applications. |
CGSDW-24273 | Resolved an issue where the v6 default routes for Internet and Private WAN were not being removed from the FIB entries even after powering down the interface. |
CGSDW-24400 | Resolved an issue where the User ID agent was crashing when there were IPv6 entries in NGFW. |
CGSDW-24482 | Resolved an issue where HMAC integrity check was failing for the controller_ca_chain.pem. |
CGSDW-24485 | Resolved an issue of FC crashing for flows with path type LAN_TO_PRIVATE_DIRECT. |
CGSDW-24501 | Resolved issues of higher switchover periods in an HA setup. |
CGSDW-24875 | Fixed an issue where the LQM service was crashing. |
CGSDW-25152 | Resolved an issue where custom L3/L4 applications were not being detected properly for UDP traffic after an HA switchover. |
CGSDW-25179 | Resolved an issue wherein the LAN interface on a standby ION device in an HA configuration was sending ARPs causing LAN disruption. |
CGSDW-25586 | Resolved an issue where the GRE tunnel was not being established when in FIPS mode. |
CGSDW-25658 | Resolved an issue of the fp-rte process restarting which was leading to HA fail-over and instability of the device. |
CGSDW-25738 | Resolved an issue for IPFIX, wherein the socket connect was always binding to the device instead of the IP address for non-used-for-controller interfaces. |
CGSDW-26226 | Resolved an issue in which the BGP on a DC ION device did not advertise the /25 route to the core router after multiple VPN flaps (due to switchover in the branch). |
CGSDW-26247 | Resolved an issue where the FC control thread was taking a lot of time to populate fib-leak entries in FIB scale. |