dump interface status interface module
Use the dump interface status interface module command
to display the EEPROM information of a device interface.
Information
displayed includes gigabit interface converter (GBIC) or small form-factor
pluggable (SFP) and extended identifier. Details such as type of
connector, transceiver codes and types, lengths supported for single-mode
optical fiber (SMF), copper, and other optical fibers, along with
vendor details, are also displayed.
Command
dump interface status [ all | interface
interface name ] module
Options
| all | Enter all to display status for all interfaces. |
| interface | Enter the interface name to
display configuration for a specific interface. |
Command Notes
| Role | Super, Read Only, Monitor |
|
| Introduced in | Release 5.1.3 |
Example
dump interface status 14 moduleIdentifier : 0x03 (SFP)Extended identifier : 0x04 (GBIC/SFP defined by 2-wire interfaceID)Connector : 0x00 (unknown or unspecified)Transceiver codes : 0x00 0x00 0x00 0x08 0x00 0x00 0x00 0x00Transceiver type : Ethernet: 1000BASE-TEncoding : 0x01 (8B/10B)BR, Nominal : 1300MBdRate identifier : 0x00 (unspecified)Length (SMF,km) : 0kmLength (SMF) : 0mLength (50um) : 0mLength (62.5um) : 0mLength (Copper) : 100mLength (OM3) : 0mLaser wavelength : 0nmVendor name : AVAGOVendor OUI : 00:17:6aVendor PN : ABCU-5730RZVendor rev :Option values : 0x00 0x10Option : TX_DISABLE implementedBR margin, max : 0%BR margin, min : 0%Vendor SN : AGC15315200QDate code : 150729
