Focus

Prisma SD-WAN ION CLI Reference

Roles to Access the ION Device CLI Commands

Table of Contents

Roles to Access the ION Device CLI Commands

Monitor, Read Only, and Super are the different access levels to the Prisma SD-WAN ION CLI commands.

Role-based access levels for the Prisma SD-WAN ION device using the command-line interface (CLI) determine how much control an administrator has over the device. The levels of access are Monitor, Read-Only, and Super.

Monitor—Enables an administrator to execute the dump, inspect and file CLI commands to display information.
Read Only—Enables an administrator to execute the dump and file CLI commands and also the inspect, debug, and search commands to display information.
Super—Enables an administrator to execute all the dump and file CLI commands and also the inspect, debug, configure, and search supported commands to display information to troubleshoot the device, and to configure the device.

Commands	User Role	Description
Dump	Super, Read Only, Monitor	Enables you to display information such as configurations, controller, and communication status.
Inspect	Super, Read Only, Monitor	Enables you to display dynamic information.
Debug	Super, Read Only	Enables you to leverage debugging commands.
Config	Super	Enables you to perform limited configuration of the device.
File	Super, Read Only, Monitor	Enables you to remove, list, view, or export files such as log files or packet captures.
Search	Super, Read Only	Reserved for future use.

There are four additional commands:

Tab—Use after typing a command to list all options for that command.
Help—Use at any time to display the command and any options available for that command.
Set—Use to change the prompt or timeout for a session.
Exit—Log out of the Prisma SD-WAN ION device CLI.

Get Started with the ION Device CLI

Command Syntax