>
    debug routing multicast log
    Focus
    Download PDF
    Focus
    1. Home
    2. Prisma
    3. Prisma SD-WAN
    4. Use CLI Commands
    5. Debug Commands
    6. debug routing multicast log
    Download PDF

    debug routing multicast log

    Table of Contents

    debug routing multicast log

    Use the debug routing multicast log command to know the routing multicast log module details.
    This command is not available from the release 6.0.1 onward.

    Command

    debug routing multicast log module =

    Options

    detailEnter detail to know the routing multicast log module details.
    noneEnter none to reset or disable the routing multicast log module for a component.
    pimEnter pim to know the pim routing multicast module details.
    packetsEnter packets know the packet routing multicast module details.
    mrtEnter mrt to know the mrt routing multicast module details.
    interfacesEnter interfaces to know the interfaces routing multicast module details.
    allEnter all to know the all routing multicast module details.
    mfcEnter mfc to know the mfc routing multicast module details.
    jpEnter jp to know the jp routing multicast module details.
    igmpEnter igmp to know the igmp routing multicast module details.
    neigbhorsEnter neigbhors to know the neigbhors routing multicast module details.
    rpfEnter rpf to know the rpf routing multicast module details.

    Command Notes

    RoleSuper
    Related Commands
    debug logging facility
    Introduced inRelease 5.6.1

    Example

    debug routing multicast log module=
				module=pim module=packets module=neighbours module=mrt module=jp module=interfaces module=all module=igmp module=rpf module=detail module=none  
				
				To reset/disable all PIMD daemon module debugging:
				
				debug routing multicast log module=none

    © 2024 Palo Alto Networks, Inc. All rights reserved.