dump interface status interface details
Table of Contents
Expand All
|
Collapse All
Prisma SD-WAN Docs
-
-
-
-
- AWS Transit Gateway
- Azure vWAN
- Azure vWAN with vION
- ChatBot for MS Teams
- ChatBot for Slack
- CloudBlades Integration with Prisma Access
- GCP NCC
- Service Now
- Zoom QSS
- Zscaler Internet Access
-
-
- ION 5.2
- ION 5.3
- ION 5.4
- ION 5.5
- ION 5.6
- ION 6.0
- ION 6.1
- ION 6.2
- ION 6.3
- ION 6.4
- New Features Guide
- On-Premises Controller
- Prisma Access CloudBlade Cloud Managed
- Prisma Access CloudBlade Panorama Managed
- Prisma SD-WAN CloudBlades
dump interface status interface details
Use the dump interface status interface details command
to display the current details of a device interface.
The
output changes based on whether the standard VPN is IPSec or GRE.
Command
dump interface status [ all | interface interface name ] details
Options
| all | Enter all to display status for all interfaces. |
| interface | Enter the interface name to display configuration for a specific interface. |
Command Notes
| Role | Super, Read Only, Monitor |
| Related Commands |
|
| Introduced in | Release 4.4.1 |
Example
dump interface config 1 Interface : 1 Description : NAT Config ID : 15670679352040140 Type : port Used For : private Admin State : up Alarms : enabled NetworkContextID: Scope : local MTU : 1500 IP : dhcp NatPoolID : 15603210612690114 IPv4Ranges : 10.10.10.20 - 10.10.10.22 NatZoneID : 15603213252200095 Wan ID : 15338838016530159 privatewan CircuitLabel : WAN-EASTERN PathLabel : WAN-EASTERN BW : manual, up 10.000000 down 30.000000 QoS : disabled LQM : enabled PCM : enabled dump interface config interface=ppp0 Interface : ppp91871660175 ID : 15024291871670177 Type : pppoe Admin State : up Alarms : enabled MTU : 0 IP : pppoe PPPOE User : test1 PPPOE Password : test$123 PPPOE Reconnect Delay : 0 dump interface config bvi-1 Interface : BVI-1 Description : BVI ID : 15734532300070135 Type : virtual_interface Used For : private Link #0 : 5 Link #1 : 6 Admin State : up Alarms : enabled NetworkContextID: Scope : local MTU : 1500 IP : dhcp dump interface config Server-NY-GRE-wCC Interface : Server-NY-GRE-wCC Description : GRE ID : 15666004852430198 Type : service_link (gre) Admin State : up Alarms : enabled NetworkContextID: Scope : local MTU : 1472 IP : static Address : 10.10.10.1/30 Parent Interface : 3 Parent Device : eth3 Peer : 10.16.12.148 Service Endpoint : GRE-SL-BGRE Checksum : disabled GRE Keepalives : enabled Interval : 10 Fail Count : 3 dump interface config Server-NY-IPSEC Interface : Server-NY-IPSEC Description : IPSEC ID : 15670047510280153 Type : service-link (ipsec) Used For : public Admin State : up Alarms : enabled NetworkContextID: Scope : local MTU : 1400 IP : static Address : 10.10.11.1/30 Parent Interface : 3 Parent Device : eth3 Peer : 10.16.12.148 Service Endpoint : IPSEC-SL-B Authentication Type : psk Local ID Type : local_ip Key Exchange : ikev2 IKE Reauth : no IKE Lifetime : 8 hours IKE Remote Port : 500 IKE DH Group/Encryption/Hash : modp1024/aes256/sha256 ESP Lifetime : 8 hours ESP Encapsulation : Auto ESP DH Group/Encryption/Hash : modp1024/aes256/sha256 DPD Enabled : yes DPD Delay : 30 DPD Timeout : 5 dump interface config 3 Interface : 3 Description: NAT Ports ID : 15035385483610095 Type : port Used For : public Admin State : up Alarms : enabled NetworkContextID: Scope : local MTU : 1500 IP : static. Address : 10.16.12.171/29 Route : 0.0.0.0/0 via 10.16.12.170 metric 0 DNS Server : 8.8.8.8 NatAddress: Port : 10.16.12.172:98765 NatZoneID : 15713885282360139 Wan ID : 15047410360100143 publicwan CircuitLabel : AT&T_ATLANTA PathLabel : AT&T_ATLANTA BW : manual, up 20.000000 down 40.000000 QoS : disabled LQM : enabled PCM : enabled