Focus

Prisma SD-WAN ION CLI Reference

dump routing multicast internal vif-entries

Table of Contents

dump routing multicast internal vif-entries

Use the dump routing multicast internal vif-entries command to display the internal vif entries in multicast.

This command is not available from the release 6.0.1 onward.

Command

dump routing multicast internal vif-entries

Options

None

Command Notes

Role	Super, Read Only, Monitor
Related Commands	dump routing multicast status
Introduced in	Release 5.6.1

Example

dump routing multicast internal vif-entries
				PIM VIF Interface array
				VIF  Index Interface         State    Flags      Address  
				0  64    pimreg            Up       0x4        192.168.1.4 (eth1)  
				1  3     eth1              Up       0x240000   192.168.1.4  
				2  4     eth2              Up       0x200400   192.168.2.4  
				3  5     eth3              Up       0xa40000   192.168.3.4  
				4  6     eth4              Up       0xc0400    192.168.4.4
				
				PIM VIF Entry list
				VIF  Index Interface         State    Flags      Address  
				0  64    pimreg            Up       0x4        192.168.1.4 (eth1)  
				1  3     eth1              Up       0x240000   192.168.1.4  
				2  4     eth2              Up       0x200400   192.168.2.4  
				3  5     eth3              Up       0xa40000   192.168.3.4  
				4  6     eth4              Up       0xc0400    192.168.4.4

dump routing multicast interface

dump routing multicast mroute