PA-7000 Series Firewall Module and Interface Card Information
Table of Contents
Expand all | Collapse all
-
-
-
- PA-7000 Series Power Configuration Options
- Determine PA-7000 Series Firewall Power Configuration Requirements
- Connect AC Power to a PA-7050 Firewall
- Connect DC Power to a PA-7050 Firewall
- Connect AC Power to a PA-7080 Firewall
- Connect DC Power to a PA-7080 Firewall
- View PA-7000 Series Firewall Power Statistics
- Connect Cables to a PA-7000 Series Firewall
- Install the PA-7080 Firewall EMI Filter
-
- Replace a PA-7000 Series Firewall Air Filter
- Replace a PA-7000 Series SMC Boot Drive
- Replace a PA-7000 Series Firewall LPC Drive
- Re-Index the LPC Drives
- Replace a PA-7050-SMC-B or PA-7080-SMC-B Drive
- Increase the PA-7000 Series Firewall LPC Log Storage Capacity
PA-7000 Series Firewall Module and Interface Card Information
The PA-7000 Series firewalls are modular systems and
requires a minimum set of front slot cards. The required cards include
the Switch Management Card (SMC), Log Processing Card (LPC) or Log
Forwarding Card (LFC), and at least one Network Processing Card
(NPC). To expand port density and throughput, you can install a
total of six NPCs in the PA-7050 firewall and ten NPCs in the PA-7080 firewall.
For details on installing front slot cards, see Install
the Mandatory PA-7000 Series Firewall Front Slot Cards.
Although all front slot cards have protection to prevent damage if they are installed or removed
when the chassis is powered on, only the NPCs and DPCs are intended to be
hot-swapped.