: PA-7000 100G NPC Requirements
Focus
Focus

PA-7000 100G NPC Requirements

Table of Contents

PA-7000 100G NPC Requirements

Learn about the PA-7000 100G NPC system and hardware requirements.
The following information describes the system and hardware requirements for the PA-7000 100G Network Processing Card (NPC).
If you install the Switch Management Card (SMC-B), Log Forwarding Card (LFC), or PA-7000 100G NPC in a PA-7050 firewall, you must install the second-generation fan trays (PA-7050-FANTRAY-L-A and PA-7050-FANTRAY-R-A). If you install these cards in a PA-7080 firewall, you must install the electromagnetic interference (EMI) filter. You do not have to install these components if the last five digits of the firewall serial number is 10,000 or greater because the PA-7050 will have the second-generation fan trays installed and the PA-7080 will have a built-in EMI filter.

Recommended For You