Interpret the PA-7000 Series Firewall AMC LEDs
Table of Contents
Expand all | Collapse all
-
-
-
- PA-7000 Series Power Configuration Options
- Determine PA-7000 Series Firewall Power Configuration Requirements
- Connect AC Power to a PA-7050 Firewall
- Connect DC Power to a PA-7050 Firewall
- Connect AC Power to a PA-7080 Firewall
- Connect DC Power to a PA-7080 Firewall
- View PA-7000 Series Firewall Power Statistics
- Connect Cables to a PA-7000 Series Firewall
- Install the PA-7080 Firewall EMI Filter
-
- Replace a PA-7000 Series Firewall Air Filter
- Replace a PA-7000 Series SMC Boot Drive
- Replace a PA-7000 Series Firewall LPC Drive
- Re-Index the LPC Drives
- Replace a PA-7050-SMC-B or PA-7080-SMC-B Drive
- Increase the PA-7000 Series Firewall LPC Log Storage Capacity
Interpret the PA-7000 Series Firewall AMC LEDs
Use the following information to learn how to interpret
the LED dashboard located on the front of the AMC. The Log Processing
Card (LPC) does not have LEDs. If there is a hardware issue with
the LPC, the LOG LED on the Switch Management Card (SMC) changes
to red and the firewall generates a system log.
LED | State | Description |
|---|---|---|
Activity | Green | The LED blinks green when there is drive activity. |
Off | The LED is off if there is no activity. | |
Fault | Red | The LED is red if a drive is missing or
faulty. |
Off | The LED is off during normal operation. | |
POWER | Green | The LED is green if the drive is powered. |
Off | The LED is off if the drive is not receiving power. |