Configure the Egress Path
Table of Contents
Configure the Egress Path
Understand how to configure egress, per-tenant interconnect and shared
interconnect
| Where Can I Use This? | What Do I Need? |
|---|---|
|
|
The Egress Path determines how traffic originating from your Prisma Access mobile
users and remote networks exits to its destination. You must configure the egress
path on the root tenant. When you are configuring the SP interconnect for the first
time, you will be prompted to choose the Egress path:
- Egress back to the service provider network- All outbound traffic from Prisma Access is routed back to your SP network before heading to its final destination. Supported for GCP and AWS.
- Egress via Prisma Access default interconnect - Outbound traffic is sent directly via the default Prisma Access internet path. Supported only for GCP.
After you configure the egress path, continue to the ingress interconnect
configuration. Note that once the ingress configuration is complete, the
selected egress path cannot be modified.
