Configure Internet Ports

Let us learn to configure internet ports.
  1. From internet ports, select a port pair.
  2. To enable the interface, for
    Admin Up
    , select
    Yes
    .
  3. (Optional)
    Enter a description.
  4. For
    Interface Type
    , select
    Port
    .
  5. For
    Use these Ports For
    , select
    Internet
    .
  6. For
    Scope
    , toggle
    Local
    or
    Global
    .
    The default is
    Local
    .
    If the scope is local, the route is not advertised to the data center.
    If the scope is global, the route is advertised to the data center.
    • This setting is applicable only to branch sites. It is not applicable to data center sites.
    • Configuring a global static route will advertise the destination IP/prefix to other sites automatically.
  7. For
    Circuit Label
    , select the circuit label that corresponds to your internet connection for this site.
  8. For
    Configuration
    , select
    DHCP
    or
    Static
    .
    Choose
    DHCP
    if the IP address is dynamically assigned.
    Choose
    Static
    if the IP address is fixed and is manually assigned. Additionally specify the
    IP Address/Mask
    ,
    Default Gateway
    , and
    DNS server(s)
    .
  9. Click
    Save Port
    .

Recommended For You