Focus

Prisma SD-WAN Administrator’s Guide

Bind Security Zones to Sites

Table of Contents

Bind Security Zones to Sites

Learn how to bind security zones to sites.

Use site bindings to map firewall zones to interfaces and networks. Binding a zone to a site attaches networks to the zones for that site. A zone can have multiple networks, but a network can only have one zone.

If a site has both site-level bindings and device-level bindings, the two settings’ resulting configuration is united. In the event of a conflict between site-level bindings and device-level bindings, device-level bindings take precedence.

You can bind security zones to sites either by selecting a security zone first and then binding it to site or you can select the site first and then select a security zone for binding.

Select a security zone and bind it to a site.

Select

Manage

Policies

Security

Security Zones

, and select a Security Zone.

From the ellipsis menu for a security zone, select

View Interface Bindings

Click

Site

Click

Bind New Site

Select a site to bind and click

Submit

On the

Site Zone Binding for Site

screen, select a circuit(s) to bind to the zone.

Click

Save

Select a site and bind a security zone to a device interface(s).

Select

Workflows

Sites/Data Centers

Select a Site

Configuration

Advanced

Bind Security Zones

Select

Sites

and click

Bind Zone

Select a zone to bind and then click

Done

On the

Zone Networks Binding for Zone

screen, select a circuit(s) to bind to the zone.

Click

Save

Bind Security Zones to Sites and Devices

Bind Security Zones to Interfaces

Prisma SD-WAN Administrator’s Guide

Bind Security Zones to Sites

Bind Security Zones to Sites

Recommended For You