Cellular Charts
Table of Contents
Expand all | Collapse all
-
-
- Add a Branch
- Add a Data Center
- Add a Branch Gateway
- Configure Circuits
- Configure Internet Circuit Underlay Link Aggregation
- Configure Private WAN Underlay Link Quality Aggregation
- Configure Circuit Categories
- Configure Device Initiated Connections for Circuits
- Add Public IP LAN Address to Enterprise Prefixes
- Manage Data Center Clusters
- Configure a Site Prefix
- Configure a DHCP Server
- Configure NTP for Prisma SD-WAN
- Configure the ION Device at a Branch Site
- Configure the ION Device at a Data Center
- Switch a Site to Control Mode
- Allow IP Addresses in Firewall Configuration
-
- Configure a Controller Port
- Configure Internet Ports
- Configure WAN/LAN Ports
- Configure a Loopback Interface
- Configure a PoE Port
- Configure and Monitor LLDP Activity and Status
- Configure a PPPoE Interface
- Configure a Layer 3 LAN Interface
- Configure Application Reachability Probes
- Configure a Secondary IP Address
- Configure a Static ARP
- Configure a DHCP Relay
- Configure IP Directed Broadcast
- VPN Keep-Alives
-
- Configure Prisma SD-WAN IPFIX
- Configure IPFIX Profiles and Templates
- Configure and Attach a Collector Context to a Device Interface in IPFIX
- Configure and Attach a Filter Context to a Device Interface in IPFIX
- Configure Global and Local IPFIX Prefixes
- Flow Information Elements
- Options Information Elements
- Configure the DNS Service on the Prisma SD-WAN Interface
- Configure SNMP
-
-
- Prisma SD-WAN Branch Routing
- Prisma SD-WAN Data Center Routing
-
- Configure Multicast
- Create a WAN Multicast Configuration Profile
- Assign WAN Multicast Configuration Profiles to Branch Sites
- Configure a Multicast Source at a Branch Site
- Configure Global Multicast Parameters
- Configure a Multicast Static Rendezvous Point (RP)
- Learn Rendezvous Points (RPs) Dynamically
- View LAN Statistics for Multicast
- View WAN Statistics for Multicast
- View IGMP Membership
- View the Multicast Route Table
- View Multicast Flow Statistics
- View Routing Statistics
- Prisma SD-WAN Incident Policies
-
- Prisma SD-WAN Branch HA Key Concepts
- Configure Branch HA
- Configure HA Groups
- Add ION Devices to HA Groups
- View Device Configuration of HA Groups
- Edit HA Groups and Group Membership
-
- Configure Branch HA with Gen-1 Platforms (2000, 3000, 7000, and 9000)
- Configure Branch HA with Gen-2 Platforms (3200, 5200, and 9200)
- Configure Branch HA with Gen-2 Embedded Switch Platforms (1200-S or 3200-L2)
- Configure Branch HA for Devices with Software Cellular Bypass (1200-S-C-5G)
- Configure Branch HA for Platforms without Bypass Pairs
- Prisma SD-WAN Clarity Reports
- Prisma SD-WAN Incidents and Alerts
Cellular Charts
The cellular activity charts present
cellular module telemetry data such as the bandwidth utilization
of cellular modules on a site and a device. Select a site, one or
more devices, and one or more cellular modules to view the cellular charts.
You can also filter by Carriers, APN profiles
and Circuits. WAN and Paths are not applicable to the Cellular charts.
You can view the data by the available time frames options—1H, 1D,
1W, 1M, and 3M. The data refreshes every 5 minutes, click the
Refresh
icon
to view the latest data at any given time. Export the data by clicking
the Export
icon.Signal
Strength Quality
The Signal Strength Quality presents
time series data for the quality of the signal strength in terms
of Excellent, Good, Fair, Poor, and Dead Zone. Sort the data by
Average, Best (max), or Worst (min).
![](/content/dam/techdocs/en_US/dita/_graphics/uv/prisma/prisma-sd-wan/prisma-sd-wan-admin/signal-strength-quality.png)
Signal
Stats
The Signal Stats chart displays various signal related
statistics, the drop-down shows signal stats to choose from. Sort
the data by Average, Best (max), or Worst (min).
- Signal-to-Noise Ratio (SNR)—Signal-to-Noise Ratio levels reported by the module (units: dB)
- Radio Signal Strength Indicator (RSSI)—Radio Signal Strength Indicator levels reported by the module (units: dBm)
- Reference Signals Received Power (RSRP)—Reference Signals Received Power levels reported by the module (units: dBm)
- Reference Signals Received Quality (RSRQ)—Reference Signals Received Quality levels reported by the module (units: dB)
- Reference Signals Code Power (RSCP)—Reference Signals Code Power levels reported by the module (units: dBm)The RSCP values shows the 3G signal data.
Traffic
Volume
The Traffic Volume chart presents the traffic volume
in KB on the selected cellular module. The volume of downloaded
and uploaded data is exported to the controller every minute. View
the data by Ingress, Egress, Ingress and Egress, or Summary.
![](/content/dam/techdocs/en_US/dita/_graphics/uv/prisma/prisma-sd-wan/prisma-sd-wan-admin/traffic-volume.png)
Technologies
The
Technologies chart presents the time series data for the cellular
technology (3G/LTE/5G) used at any given time and correlates with
signal strength time series data. View the data by Worst or Best.
![](/content/dam/techdocs/en_US/dita/_graphics/uv/prisma/prisma-sd-wan/prisma-sd-wan-admin/technologies.png)
Bandwidth
Usage
The Bandwidth Usage chart presents the time series
data on bandwidth utilized in Kbps on a Cellular module. The cellular
interface throughput is exported to the controller every minute.
Use this chart to identify congestion in a network. View the data
by Ingress, Egress, Ingress and Egress, or Summary.
![](/content/dam/techdocs/en_US/dita/_graphics/uv/prisma/prisma-sd-wan/prisma-sd-wan-admin/bandwidth-usage.png)
Packet
Drops
The Packet Drops shows the number of packet dropped
on the cellular module. Correlate packet dropped with bandwidth
usage to understand the issue. View the data by Ingress, Egress,
Ingress and Egress, or Summary.
![](/content/dam/techdocs/en_US/dita/_graphics/uv/prisma/prisma-sd-wan/prisma-sd-wan-admin/packet-drops.png)
Packet
Errors
The Packet Errors chart shows the packet-related
errors on the cellular module. Correlate packet errors with traffic
volume and bandwidth usage. View the data by Ingress, Egress, Ingress
and Egress, or Summary.
![](/content/dam/techdocs/en_US/dita/_graphics/uv/prisma/prisma-sd-wan/prisma-sd-wan-admin/packet-errors.png)
Packet
Overflows
The Packet Overflows chart shows the packet
overflows on the cellular module. The chart helps to analyze bandwidth
issues. View the data by Ingress, Egress, Ingress and Egress, or
Summary.
![](/content/dam/techdocs/en_US/dita/_graphics/uv/prisma/prisma-sd-wan/prisma-sd-wan-admin/packet-overflows.png)
GPS
Location(s)
The GPS location chart shows the GPS location
history of the selected cellular module. If there is only GPS location
indicating the device is static, the chart displays the map of the
GPS location. If there are multiple GPS locations indicating the
device is moving, the chart shows the time and GPS location history
with an option to view the location on the map.
![](/content/dam/techdocs/en_US/dita/_graphics/uv/prisma/prisma-sd-wan/prisma-sd-wan-admin/gps-location.png)
Cellular
Tower Switches
The Cellular Tower Switch presents the
time series data for the number of cellular switches by the selected
cellular module. If the ION device is mobile or if the device is
closer to more than one cellular tower, tower switches are likely
to happen and indicated in the chart. Use this chart to correlate
with the signal strength time series data.
![](/content/dam/techdocs/en_US/dita/_graphics/uv/prisma/prisma-sd-wan/prisma-sd-wan-admin/cellular-tower-switches.png)