Refresh and Restart Behaviors
Focus
Focus

Refresh and Restart Behaviors

Table of Contents
End-of-Life (EoL)

Refresh and Restart Behaviors

You can Refresh or Restart an IKE Gateway or IPSec Tunnel. The refresh and restart behaviors for an IKE gateway and IPSec tunnel are as follows:
Phase
Refresh
Restart
IKE Gateway (IKE Phase 1)
Updates the onscreen statistics for the selected IKE gateway.
Equivalent to issuing a second
show
command in the CLI (after an initial
show
command).
Restarts the selected IKE gateway.
IKEv2
: Also restarts any associated child IPSec security associations (SAs).
IKEv1
: Does not restart the associated IPSec SAs.
A restart is disruptive to all existing sessions.
Equivalent to issuing a
clear
,
test
,
show
command sequence in the CLI.
IPSec Tunnel (IKE Phase 2)
Updates the onscreen statistics for the selected IPSec tunnel.
Equivalent to issuing a second
show
command in the CLI (after an initial
show
command).
Restarts the IPSec tunnel.
A restart is disruptive to all existing sessions.
Equivalent to issuing a
clear
,
test
,
show
command sequence in the CLI.

Recommended For You