>
    debug ipfix
    Focus
    Download PDF
    Focus
    1. Home
    2. Prisma
    3. Prisma SD-WAN
    4. Use CLI Commands
    5. Debug Commands
    6. debug ipfix
    Download PDF

    debug ipfix

    Table of Contents

    debug ipfix

    Use the debug ipfix command to configure filters to select flow statistics for debugging and troubleshooting.

    Command

    debug ipfix ((create | view | delete) [id=|host1=|host2=|port1=|port2=|protocol=])

    Options

    idEnter a number between 1 and 4 for the filter ID.
    host1Enter the source IP address of the originator or client for selecting the flow.
    host2Enter the destination IP address of the server for selecting the flow.
    port1Enter the source UDP or TCP port of the originator or client for selecting the flow. This applies only to UDP or TCP connections.
    port2Enter the destination UDP or TCP port of the server for selecting the flow. This applies only to UDP or TCP connections.
    protocolEnter the IP protocol used for selecting the flow.

    Command Notes

    RoleSuper
    Related Commands
    debug logging facility=ipfix
    Introduced in Release 5.5.1

    Example

    debug ipfix view all
				ID  Host1            Host2            Port1  Port2  Protocol
				--  ---------------  ---------------  -----  -----  -------- 
				1  10.16.12.163                        tcp            (6)         
				2  10.16.12.163                        tcp            (6)

    © 2024 Palo Alto Networks, Inc. All rights reserved.